Stamp Test - Muratec MFX-2500 Field Engineering Manual

Hide thumbs Also See for MFX-2500:

Table of Contents

1. Press MENU, *, 9.

2. Select "B. Test Pattern Print" by cursor key, then press [Enter].

3. Select the desired test pattern by cursor key, then press [Enter].

4. Select the paper to print by cursor key.

5. Press [Enter]. The selected pattern will print continuously.

Note: Press STOP to cancel the printing.

6. Press STOP to finish printing and return to standby.

3.9.3 Stamp Test

This mode tests the operation of the stamp.

1. Insert one sheet of paper into the document feeder of the machine.

2. Press MENU, *, 9.

3. Select "C. Stamp Test" by cursor key, then press [Enter].

4. Press [Start]. The page will be stamped while it is fed through the document feeder.

Note: To finish the operation without performing the stamp test, press [Cancel] .

5. Press STOP to return to standby.

Table of Contents