Image Rotate Transmission; Setting The Confirmation Stamp - Muratec MFX-2500 Operating Instructions Manual

Image rotate transmission

Default setting: ON.
When this feature is activated, if you set A4-sized document in the sideways direc-
tion( ), the image will be sent rotated by 90°.
1
Press , , 0, 3, [Enter].
MENU J
2
Choose desired setting you want using the
cursor key. Then press [Enter].
3
Press to return to the standby mode.
RESET

Setting the confirmation stamp

Default setting: OFF.
You can set your fax machine so that it will automatically place a small blue ink
stamp mark on the front of each original document that it successfully scans.
Important: Turn off this feature if you're sending documents you don't want the
fax to stamp.
1
Press , , 1, 4, [Enter].
MENU J
The shows your fax's current setting:
LCD
2
Select "On" or "Off" using the cursor key.
3
Press [Enter] to save the setting.
4
Press to return to the standby mode.
RESET
Entering settings for your machine
3.3