How To Install The System Into An Empty 2-Post Rack; Before You Begin; What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

How to Install the System Into an Empty
2-Post Rack

Before You Begin

Complete the following task:
"How to Remove the System From an Empty 2-Post Rack" on page 189
I
Caution – The chassis is heavy. Two persons are required to install the system into
the rack in the following procedure.

What to Do

1. Lift the server up and over the mounting screw on each side of the vertical
mounting rails so that the large hole clears the head of the screw.
2. Slide the server down so that the server rests on the mounting screws.
Appendix A 2-Post Rack Service Requirements 191