7. Using a Phillips No. 2 screwdriver, tighten the right-side captive screw (close to
the front of the system).
8. Using a Phillips No. 2 screwdriver, tighten the left-side captive screw (close to the
back of the system).
What Next
Complete these tasks:
"How to Install the CPU Access Panel" on page 76
I
"How to Slide the System Into the Cabinet" on page 31
I
"How to Power On the System" on page 18
I
"How to Initiate a Reconfiguration Boot" on page 23
I
Chapter 4 Servicing the CPU/Memory Board and Related Components
83