Cable Connections And Routing - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

5. Connect the two internal Loop B cables to the Sun StorEdge PCI Dual Fibre-
Channel Host Adapter's internal connectors and the FC-AL backplane.
The Loop B cable assembly is purchased separately from the Sun StorEdge PCI Dual
Fibre-Channel Host Adapter, and is unique to the Sun Fire V490 server. See
Cables" on page 226
FC-AL backplane
(FROM DISKS)
Note – Be sure to connect the cables as shown. Loop B will not function if the cables
are connected incorrectly.
Note – For cable routing information, see
page 166.
for the correct part number.
J0203
(TO DISKS)
J0202
Front of system
Chapter 5 Servicing the PCI Riser Board and Related Components
J4 J3
(RX) (TX)
Sun StorEdge PCI
Dual Fibre-Channel
Host Adapter
"Cable Connections and Routing" on
"System
121