What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

What to Do

1. Align the new power supply with its bay.
Note – If you are hot-swapping a power supply, wait until the system displays a
console message confirming removal of the old power supply. Refer to your Sun Fire
V490 Server Administration Guide for more information.
2. Slide the new power supply into the power supply bay until the power supply
connectors start to engage the connectors on the power distribution board.
3. Push firmly on the front of the power supply to engage the connectors with the
power distribution board.
Caution – If you are hot-swapping a redundant power supply, take care to avoid
jarring the system, as some movements could adversely affect the system while it is
running.
Chapter 3 Servicing the Front Panel Components 53