What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

What to Do

1. Locate the slot for the SC card.
The SC card is installed in the fifth slot from the edge of the PCI riser board. It is
labeled "SC" on the back panel.
Note – Make sure that you install the SC card into the SC slot. Though the SC card
can physically fit into a PCI slot, it will not function if installed there.
Caution – Be sure that the AC power cords are disconnected from the system before
installing the SC card.
2. Insert the SC card into its slot on the PCI riser board.
a. Insert the faceplate end of the card into the appropriate opening in the back
panel.
110 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
SC card