Caution – Make sure that the PCI riser board and its components have been
removed before proceeding. Trying to remove the centerplane before removing the
PCI riser board can seriously damage both components.
4. Using a long-stem Phillips No. 2 screwdriver, loosen the four captive screws
securing the centerplane to the bottom of the chassis.
5. Pull the centerplane straight up and out of the system and place the centerplane
on an antistatic mat.
Be careful not to damage the connectors securing the centerplane to the power
distribution board.
What Next
Complete this task:
"How to Install the Centerplane" on page 147
I
146
Sun Fire V490 Server Parts Installation and Removal Guide • October 2005