Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual page 140

a. Remove the Phillips No. 1 screw securing the PCI filler panel to the chassis
back panel.
b. Lift out the filler panel.
3. Insert the PCI card into the appropriate slot on the PCI riser board.
There are six PCI slots on the PCI riser board.
a. Insert the faceplate end of the card into the appropriate opening in the back
panel.
If you are installing a PCI long card, guide the opposite end of the PCI card into
the corresponding card runner on the PCI riser board.
116 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
PCI filler panel