How To Remove The Pci Riser Board; Before You Begin - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

How to Remove the PCI Riser Board

Before You Begin

Depopulate the PCI riser board by completing the following tasks:
"How to Power Off the System" on page 22
I
"How to Slide the System Out of the Cabinet" on page 25
I
"How to Remove the PCI Access Panel" on page 100
I
"How to Avoid Electrostatic Discharge" on page 41
I
"How to Remove Fan Tray 1" on page 103
I
"How to Remove the System Controller (SC) Card" on page 107
I
"How to Remove a PCI Card" on page 112
I
Note – You must remove all cables and cards from the PCI riser board before
removing the PCI riser board from the system.
Caution – If you are using an antistatic wrist strap to protect against electrostatic
discharge, connect it to a properly grounded surface, such as a nearby equipment
rack, or a nearby system that is connected to a power source.
Chapter 5 Servicing the PCI Riser Board and Related Components 123