What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

What to Do
1. Insert the IDPROM module into its socket on the PCI riser board.
Make sure that the notch on the IDPROM module is on the same side as the notch
on the connector on the PCI riser board.
2. Push down firmly on the IDPROM module until it seats in its socket.

What Next

Complete these tasks:
"How to Install the PCI Riser Board" on page 126
I
"How to Install a PCI Card" on page 115
I
"How to Install the System Controller (SC) Card" on page 109
I
"How to Install Fan Tray 1" on page 105
I
"How to Install the PCI Access Panel" on page 102
I
"How to Slide the System Into the Cabinet" on page 31
I
"How to Power On the System" on page 18
I
"How to Initiate a Reconfiguration Boot" on page 23
I
IDPROM
module
Matching
notches
Connector on
PCI riser
board
Chapter 5 Servicing the PCI Riser Board and Related Components 131