What to Do
1. Connect the removable media assembly (RMA) cable end to its corresponding
connector on the DVD-ROM drive.
2. Using a Phillips No. 1 screwdriver, attach the three screws that secure the RMA
cable to the DVD-ROM drive.
What Next
Complete these tasks:
"How to Install the Removable Media Assembly" on page 139
I
"How to Install Fan Tray 1" on page 105
I
"How to Install the PCI Access Panel" on page 102
I
"How to Slide the System Into the Cabinet" on page 31
I
"How to Power On the System" on page 18
I
Chapter 7 Servicing Cables
175