Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual page 144

b. Lift out the filler panel.
3. Insert the Sun StorEdge PCI Dual Fibre-Channel Host Adapter into the
appropriate slot on the PCI riser board.
There are two 66-MHz PCI slots on the PCI riser board.
a. Insert the faceplate end of the card into the appropriate opening in the back
panel.
b. Push the card into the corresponding connector on the PCI riser board.
Caution – Do not apply excessive force to one end or one side of the card. Doing so
could damage the card.
Apply even pressure along the edge of the card.
4. Using a Phillips No. 1 screwdriver, secure the card faceplate to the back panel.
120 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
PCI filler panel