How To Install The Fc-Al Data Cable; Before You Begin; What To Do; I "How To Remove The Fc-Al Data Cable - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual
Hide thumbs
Also See for Sun Fire V490:
- Administration manual (276 pages) ,
- Setup and rackmounting manual (64 pages) ,
- Setup and rackmounting manual (62 pages)
Table of Contents
Advertisement
How to Install the FC-AL Data Cable
Before You Begin
Complete this task:
"How to Remove the FC-AL Data Cable" on page 170
I
What to Do
1. Make sure that the ejector levers at J0200 on the FC-AL backplane are rotated
outward.
Push the cable end into its connector until the ejector levers snap into place.
2. Connect the P1 cable end to J0200 on the FC-AL backplane.
Push the cable end into its connector until the ejector levers snap into place.
3. Connect the P2 cable end to J6502 on the centerplane.
172
Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
FC-AL data cable
Advertisement
Table of Contents
