Cable Connections And Routing - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

Cable Connections and Routing

Use this table as a guide for connecting and routing system cables. Match cable ends
(P numbers) with the corresponding board connectors (J numbers). Following
sections describe how to remove and install these cables.
TABLE 7-1
Cable Name and Part Number
FC-AL power cable
(F530-3013)
FC-AL data cable
(F530-3069)
Removable media assembly
(RMA) cable
(F375-3053)
166 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
Cable Connections and Routing
Routed From
FC-AL backplane at
J0201 (P1)
FC-AL backplane at
J0200 (P1)
PCI riser board at J1001
(P1)
Routed To
PCI riser board at J1901
(P2)
Centerplane at J6502
(P2)
DVD-ROM drive (P2)
Cable Management Notes
Route under Fan Tray 1.
Route above the system
control switch/power
button cable.
Connect the P2 cable end
first; route under the drive
bay; tuck any excess cable
length under the PCI riser
board before installing the
RMA.