Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual page 137
Hide thumbs
Also See for Sun Fire V490:
- Administration manual (276 pages) ,
- Setup and rackmounting manual (64 pages) ,
- Setup and rackmounting manual (62 pages)
Table of Contents
Advertisement
3. Using a Phillips No. 1 screwdriver, remove the screw securing the card to the
chassis back panel.
4. Pull the PCI card from its slot.
Caution – Do not apply excessive force to one end or one side of the card. Doing so
could damage the card.
Hold the card by the faceplate and its opposite edge, and pull up while rocking the
card from end to end until it is freed from its slot.
5. Place the PCI card on an antistatic mat.
Chapter 5 Servicing the PCI Riser Board and Related Components
113
Advertisement
Table of Contents
