10. Pushthe empty slides back into their protective slide assemblies.
11. Replace, close, and lock the cabinet doors, as appropriate.
What Next
To install the system into the cabinet, see:
"How to Install the System Into the Cabinet" on page 39
How to Install the System Into the
Cabinet
This procedure assumes that the slide assemblies are already installed in the cabinet.
For information about installing the slide assemblies, see:
Sun Fire V440 Server Installation Guide
Caution – The system is heavy. Two persons are required to install the system into
the cabinet.
Before You Begin
Complete the following tasks:
Identify a helper to assist you in installing the system.
Open and remove the front door and back door of the cabinet, as appropriate.
Chapter 2 Preparing to Service the System
39