How To Install The Pci Riser Board; Before You Begin; What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

How to Install the PCI Riser Board

Before You Begin

Complete this task:
"How to Remove the PCI Riser Board" on page 123
I
If you are replacing the PCI riser board with a new one, complete this task:
"How to Install the IDPROM Module" on page 130
I
Caution – If you are using an antistatic wrist strap to protect against electrostatic
discharge, connect it to a properly grounded surface, such as a nearby equipment
rack, or a nearby system that is connected to a power source.

What to Do

1. Slide the PCI riser board into the system.
Make sure that the sides of the PCI riser board are inserted properly into their
mounting rails, and that the mounting levers are fully extended.
Note – Be sure to keep all the cables clear of the left side of the PCI riser board as
you insert it into the system.
126 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005