What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

5. Slide the system chassis evenly out of the cabinet until the inner glides stop in the
slide.
Pull the system smoothly out of the enclosure, holding the system by the power
supply handles. Continue pulling the system until the back of the chassis clears the
enclosure and you hear the flat spring catches in the glides engage with an audible
clicking sound. The system is then fully extended and secure.
Note – If you need to remove the server completely from the cabinet, see
Step 6
through Step 10 in "How to Remove the System From the Cabinet" on page 33.

What Next

To slide the system into the cabinet, see:
"How to Slide the System Into the Cabinet" on page 31
I
28 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005