How To Install The Pci Access Panel; Before You Begin; What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual
Hide thumbs
Also See for Sun Fire V490:
- Administration manual (276 pages) ,
- Setup and rackmounting manual (64 pages) ,
- Administration manual (274 pages)
Table of Contents
Advertisement
How to Install the PCI Access Panel
Before You Begin
Complete this task:
"How to Remove the PCI Access Panel" on page 100
I
What to Do
1. Make sure that the top panel lock is in the Unlocked position.
2. Position the PCI access panel into its place on the chassis.
Align the lip on the right side of the access panel with the corresponding ridge on
the chassis.
3. Tighten the three Phillips No. 2 captive screws that secure the access panel to the
chassis.
102
Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
Advertisement
Table of Contents
