What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

4. Physically remove the disk drive and press the Return key.
Follow the instructions in Step 1 through Step 6 of
on page
Hit <Return> after removing the device(s).
date system-name picld[87]: Device DISK1 removed
Logical Nodes being removed under /dev/dsk/ and /dev/rdsk:
#
The picld daemon notifies the system that the disk drive has been removed.
Note – Screen confirmation may take up to one minute.
For more information, refer to Platform Notes: Using luxadm Software, which is
provided on the Solaris Software Supplement CD for the Solaris release you are
running.
Refer also to the luxadm(1M) man page.

What Next

If you need to install a drive using the hot-plug operation, complete this task:
"How to Install a Disk Drive Using the Hot-Plug Operation" on page 63
I
62 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
55. The system responds with the following message:
c1t1d0s0
c1t1d0s1
c1t1d0s2
c1t1d0s3
c1t1d0s4
c1t1d0s5
c1t1d0s6
c1t1d0s7
"How to Remove a Disk Drive"