Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual page 182

4. Push the media door assembly up and pull it forward to unhook it from the
chassis.
The two tabs secure the media door assembly to the chassis.
Note – You can slide Power Supply 1 halfway out of the chassis and use it to
support the media door assembly while you complete the removal procedure.
5. Carefully tip the media door assembly forward.
Caution – Do not drop the media door assembly. The system control switch/power
button cable is attached to the media door assembly, and it can be damaged if the
media door assembly is pulled too far away from the chassis.
158 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005