What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

5. Route the Fan Tray 0 cable behind the faceplate, and connect it to J2302 on the PCI
riser board.
Press the cable end into its socket until it snaps into place.
6. Route the system control switch/power button cable behind the centerplane-side
Fan Tray 1 bracket, and connect it to J1401 on the PCI riser board.
Press the cable end into its socket until it snaps into place.

What Next

Complete these tasks:
"How to Install the Removable Media Assembly" on page 139
I
"How to Install the FC-AL Backplane" on page 136
I
"How to Install Fan Tray 1" on page 105
I
"How to Install the PCI Access Panel" on page 102
I
"How to Install the Power Supply Access Panel" on page 48
I
"How to Slide the System Into the Cabinet" on page 31
I
"How to Install a Disk Drive" on page 57
I
"How to Power On the System" on page 18
I
Chapter 6 Servicing Miscellaneous Components 163