What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

2. Unlock and open the media door.
3. Remove the RMA faceplate.
Remove the two Phillips No. 1 mounting screws and pull off the faceplate.
4. Reach inside the system and push the RMA forward.
Be careful not to damage the RMA cable.
5. With your other hand, cradle the RMA from underneath and pull it out of the
RMA bay.
Thread the RMA and its cable out of the system through the RMA bay.
6. Place the RMA on an antistatic mat.
Note – If you are replacing a failed DVD-ROM drive, you must remove the
DVD-ROM drive from the RMA bracket.

What Next

If you are replacing a failed DVD-ROM drive or failed RMA cable, see:
"How to Remove the Removable Media Assembly Cable" on page 173
I
138 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005