Installing Into A Two-Post Relay Rack; The Fixed Mounting Bracket Kit; To Fit The Fixed Mounting Brackets; Figure 5-12 Removing The Thumbscrew Brackets - Sun Microsystems Netra t1 100 User And Administration Manual

Installing into a Two-Post Relay Rack

The Fixed Mounting Bracket Kit

The parts you require are listed in
Fixed Bracket Mounting Kit
TABLE 5-3
Description
Brackets
M4 x 8mm countersunk Phillips screw kit

To Fit the Fixed Mounting Brackets

1. Remove the thumbscrew rack mounting brackets from either side of the system
(see ).
FIGURE 5-12
Removing the Thumbscrew Brackets
FIGURE 5-12
.
TABLE 5-3
Quantity
4
1
Chapter 5 Installing the Netra t1 into a Rack
Part No.
340-5819
565-1654
43