What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual
Hide thumbs
Also See for Sun Fire V490:
- Administration manual (276 pages) ,
- Setup and rackmounting manual (64 pages) ,
- Setup and rackmounting manual (62 pages)
Table of Contents
Advertisement
What to Do
1. Become superuser or the root user.
% su
Password:
#
2. Insert the disk drive into its disk drive bay.
Follow Step 1 through Step 5 of
system responds with the following message:
# date system-name picld[87]: Device DISK1 inserted
3. If you are formatting a new disk drive, or reformatting an existing disk drive,
complete the following tasks:
Caution – Formatting a disk drive destroys any data that is already on the disk
drive.
a. Enter the following command:
# format
Searching for disks... done
The system responds with the disks available for formatting.
b. Type the number of the disk drive you are formatting:
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@ 8,600000/ SUNW, qlc@ 4/ fp@ 0,0/ ssd@w210000203760c2fe, 0
1. c1t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@ 8,600000/ SUNW, qlc@ 4/ fp@ 0,0/ ssd@ w21000020371b1f31,0
Specify disk (enter its number): 1
selecting c1t1d0
[disk formatted]
64
Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
"How to Install a Disk Drive" on page
57. The
Advertisement
Table of Contents
