How To Install The Idprom Module; Before You Begin; What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

2. Grasp the IDPROM module at each end and pull it straight up.
If necessary, gently rock the IDPROM module from side to side to facilitate removal.
3. Place the IDPROM module on an antistatic mat.

What Next

Complete this task:
"How to Install the IDPROM Module" on page 130
I

How to Install the IDPROM Module

If you are installing a new IDPROM module, it must be programmed by an
authorized Sun service representative before your system can resume normal
operation. If you are installing a new PCI riser board, remember that you can
migrate your former IDPROM module in order to preserve your system's host ID
and Ethernet address.

Before You Begin

Complete this task:
"How to Remove the IDPROM Module" on page 129
I
130 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005