What To Do; What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

What to Do

1. Unlock and open the media door.
The security lock secures the media door, power supply access panel, and Fan
Tray 0.
2. Release the disk drive handle on the disk drive.
Pinch the disk drive latch sideways to open it.
3. Align the disk drive to its drive bay.
Orient the disk drive so that the disk drive latch is on the right.
Note – If you are replacing a drive that you removed previously, be sure to install
the disk drive into the same drive bay from which it was removed.
4. Insert the disk drive into the disk drive bay guide rails.
Slide the disk drive into the bay until it barely contacts the backplane.
5. Firmly press the center of the disk drive handle toward the disk drive until the
latch closes, securing the disk drive in place.

What Next

Complete this task:
58 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
Disk drive latch
Disk drive handle