What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

What to Do

1. Slide the system chassis evenly into the cabinet until the system comes to a
complete stop.
2. Tighten the four captive screws securing the system to the left and right vertical
rails at the front of the rack.
Use a Phillips No. 2 screwdriver to tighten the four captive screws, which are in
recessed access holes in the decorative panels affixed to the system's front panel.
3. Connect all external cables that were attached to the back panel of the system.
Examine each disconnected cable for information indicating the cable's origin and its
terminating connection.
4. Replace, close, and lock the cabinet doors, as appropriate.
32 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005