What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

b. Insert the opposite end of the card into the appropriate card guide so that the
card is aligned evenly with the connectors on the PCI riser board.
c. Push the card into the connectors on the PCI riser board.
Apply even pressure along the edge of the card.
3. Secure the SC card faceplate to the back panel with the Phillips screw.
4. Connect the Ethernet and serial cables to the faceplate of the SC card.
5. Connect the AC power cords to the back of the system.

What Next

Complete these tasks:
"How to Install the PCI Access Panel" on page 102
I
"How to Slide the System Into the Cabinet" on page 31
I
"How to Power On the System" on page 18
I
Chapter 5 Servicing the PCI Riser Board and Related Components 111