Locating Back Panel Features
The illustration below shows the system features that are accessible from the back
panel.
System controller card
System status LEDs
66-MHz PCI slots
33-MHz PCI slots
Power Supply 1 AC inlet
External I/O ports
Power Supply 0 AC inlet
Power Supply 1 status LEDs
Power Supply 0 status LEDs
Back Panel LEDs
System Status LEDs
The back panel system status LEDs consist of the Power/OK LED, the system Fault
LED, and the Locator LED. These LEDs are located in the top-left corner of the back
panel, and operate as described in
.
TABLE 1-1
10
Sun Fire V490 Server Parts Installation and Removal Guide • October 2005