How To Remove A Disk Drive; Before You Begin - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

How to Remove a Disk Drive

This procedure describes the physical disk drive removal. The procedure is different
if you are removing a drive using a hot-plug operation. If you want to perform a
hot-plug removal, see
on page 59.

Before You Begin

If a disk drive fails, the system Fault LED and the disk drive Fault LED will light.
System Fault LED
For additional information about the disk drives, see your Sun Fire V490 Server
Administration Guide.
You must follow antistatic precautions when handling a disk drive. Complete this
task:
"How to Avoid Electrostatic Discharge" on page 41
I
If you are not performing a hot-plug operation, complete this task:
"How to Power Off the System" on page 22
I
"How to Remove a Disk Drive Using the Hot-Plug Operation"
Disk drive Fault LED
Chapter 3 Servicing the Front Panel Components 55