Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual page 116
Hide thumbs
Also See for Sun Fire V490:
- Administration manual (276 pages) ,
- Setup and rackmounting manual (64 pages) ,
- Setup and rackmounting manual (62 pages)
Table of Contents
Advertisement
1. Remove the DIMM access panel from the CPU/Memory board.
Push both tabs inward until you can lift the access panel free of the CPU/Memory
board shroud.
2. Identify the memory module to be removed.
3. Push down on the ejector levers on each end of the memory module until it pops
out of its connector.
Apply even pressure on both levers.
88
Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
Advertisement
Table of Contents
