What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

6. If you are not replacing the PCI card, install a PCI filler panel to prevent dust
from entering the system, and to ensure proper cooling.
a. Slide the filler panel into the appropriate slot.
b. Replace the Phillips No. 1 screw that secures the filler panel to the chassis back
panel.

What Next

To install a PCI card, complete this task:
"How to Install a PCI Card" on page 115
I
To return the system to operation without installing a new PCI card, complete these
tasks:
"How to Install the PCI Access Panel" on page 102
I
"How to Slide the System Into the Cabinet" on page 31
I
"How to Power On the System" on page 18
I
"How to Initiate a Reconfiguration Boot" on page 23
I
114 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005
PCI filler panel