What Next - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

2. Attach the cable to the cable tie on the side of the drive bay.
3. Route the P3 cable end along the top edge of the chassis and connect the cable to
its clips on the chassis.
4. Connect the back panel flex-circuit cable end to the P3 cable end on the system
control switch/power button cable.

What Next

Complete these tasks:
"How to Install the Media Door Assembly" on page 160
I
"How to Install the Removable Media Assembly" on page 139
I
"How to Install Fan Tray 1" on page 105
I
"How to Install the PCI Access Panel" on page 102
I
"How to Install the Power Supply Access Panel" on page 48
I
"How to Install the System Into the Cabinet" on page 36
I
"How to Power On the System" on page 18
I
178 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005