What Next; How To Install The System Into The Cabinet - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

8. Simultaneously press in on both flat spring catches to release them, and then slide
the system out of the ends of the slide assembly.
Each person presses one spring catch and helps slide the system free of the outer
glide, supporting the weight of the system with both hands as the system slides free
of the rack.
9. Set the system on a workbench or other stable surface.
10. Replace, close, and lock the cabinet doors, as appropriate.

What Next

To place the system into the rack glides, see:
"How to Install the System Into the Cabinet" on page 36
I
How to Install the System Into the
Cabinet
This procedure assumes that the slide assemblies are already installed in the rack.
For further information about installing the slide assemblies, refer to the Sun Fire
V490 Server Setup and Rackmounting Guide.
Caution – The chassis is heavy. Two persons are required to place the system into
the rack slide assembly in the following procedure.
36 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005