Panasonic KX-TD500 System Reference Manual page 876

7.00 Returning to Previous
Screen by PREV
To return to the previous page of the same setting
screen, press the PREV key.
When no data has been entered:
• Returns to the previous page.
When data has been entered, but not stored by
PF4 key:
• The following message appears at the
bottom of the screen.
Parameter Save OK ? (Y:yes/N:no/C:cancel)
<Example>
No data entry
System-Operation
Tenant Service
Automatic Route Selection
System-Operation
System Administration Device
SMDR
PREV
Press PREV key.
Operation (1/3)
1) To store the entered data, enter "Y" and
not to store, enter "N".
Pressing the RETURN key causes the
screen to return to the previous page.
2) To cancel the entered parameters, press
"C" key, then the RETURN key.
The screen does not change.
Operation (2/3)
With data entry, but not stored by
PF4
The following message is displayed
at the bottom of the screen:
Parameter Save OK?(Y:yes/N:no/C:cancel)
Y N
or or
RETURN RETURN
The screen shows the
previous page.
8-H-6
Press "Y" or "N" or "C"
C
key.
Press RETURN.