Panasonic KX-TD500 System Reference Manual page 754

If the specified parking area is occupied:
Message : Call park at xx deny
xx: parking area number
To start conversation again, press the LOOP key.
Retrieving a parked call
There are two ways to retrieve a parked call.
Retrieving a parked call by pressing the CALL
PARK key (programmable key)
1. Press an idle LOOP key.
LOOP
• The SRC indicator of the LOOP
key is lit.
Dial tone sounds.
2. Press the CALL PARK key.
CALL PARK
• No tone is heard.
3. Dial the call park area number
(01 to 20).
• After you hear confirmation
tone, speak with a parked
caller.
• The following message appears
on the message line on CRT
screen:
Message : Call park retrieve from xx
xx: call park area number (01 to 20)
(Supplement)
If no call is parked in a specified parking area,
reorder tone sounds and the following message
appears on the message line:
Message : Call park retrieve deny
Retrieving a parked call employing Call Park
System screen
1. Press the F5 key (call park).
F5
• Call Park System screen appears
2. Move the cursor to the desired
number to be retrieved by pressing
F
the F4, F5, F6 keys (
3. Press an idle LOOP key.
LOOP
• The SRC indicator of the LOOP
4. Press the F7 key (park retrieve).
F7
• After hearing confirmation tone,
• The following message appears
Message : Call park retrieve from xx.
xx : parking area number
6-F-4
on the screen.
,
key is lit and dial tone sounds.
speak with the parked party.
on the message line of CRT:
, ).