Panasonic KX-TD500 System Reference Manual page 775

I. Paging Features
1.00 Paging
1.01 Paging All Extensions
Description
Allows the attendant to make paging
announcement through built-in speakers of all
PITS telephones by dialing the feature number
for "Station Paging" and "0".
Programming
System Programming
"System-Numbering Plan (3/11)",
Station Paging
Conditions
Single line telephones (SLT's) cannot be paged.
If Tenant Service is employed, paging is only
available within the same tenant as the attendant
console.
If an extension is off-hook or its SP-PHONE is
active, paging is unavailable for the extension.
Current call is parked and paging all extensions
through built-in speaker of all PITS telephones
can be carried out by pressing the PAGE key
during a conversation.
For further information, refer to Section 6-I-1.05
"Call Park and Paging".
Reference
VT Dumb
10-D-6.03 11-C-11.00
6-I-1
Operation
1. Press an idle LOOP key and dial
LOOP
the feature number for "Station
Paging" and "0" in succession.
• After confirmation tone sounds,
all extension paging through
built-in speakers is possible.
2. Perform paging.
3. An extension answers the page.
4. Press the RELEASE key.
RELEASE
Transferring a call using Paging All Extensions
During a conversation with an extension or
outside party,
1. Dial the feature number for
"Station Paging" (Default: *42)
and "0" in succession.
• After confirmation tone sounds,
extension paging starts.
• The first party is placed on
hold.
2. Perform paging.
3. After an extension answers the
page, press the RELEASE key.
RELEASE
• Conversation between the held
party and the paged party
starts. Attendant console
becomes silent.