Panasonic KX-TD500 System Reference Manual page 969

Conditions
This screen does not appear if "System-Operation", Tenant Service is assigned to "No".
Operator 1 (Tenant 2)
Operator 2 (Tenant 2)
Speed Dialing-System
Boundary/Call Park
Boundary/Message
Waiting Boundary/Absent
Message Boundary
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen.
For operation, refer to Section 8-I "Operation of Function Keys".
This system can accommodate up to two Attendant consoles. If two
Attendant Consoles are assigned to tenant 1, no Attendant consoles can
be assigned to tenant 2.
If Tenant Service is available, the following items can be split between
tenant 1 and tenant 2. The boundaries are to set tenant-boundary
numbers. The last number that tenant 1 can use must be assigned in
each boundary for the functions below:
Speed Dialing-System
Call Park-System
Message Waiting
Absent Message
<Example>
Up to 200 speed dialing codes can be programmed for the system. If you
wish to assign 150 codes to tenant 1 and 50 codes to tenant 2, enter
"150" in Speed Dialing-System Boundary.
Speed dialing codes
If tenant 1 uses no code and tenant 2 uses 200 codes, enter "000".
3 4 5
001
002
•
•
•
•
•
150
151
200
6 HRD CPY 7
10-D-19
Only tenant 1 can use
the codes.
Only tenant 2 can use
the codes.
8