Error Message Tables; Error Messages Related To The Assigning Items In The Same Screen - Panasonic KX-TD500 System Reference Manual

K. Error Message Tables
1.00 Error Messages Related to
the Assigning Items in the
Same Screen
If there is a wrong entry in the displayed screen,
the following appears on the message line when
storing the entry: "Contradict the relative item
internal (XXX)".
Error Message No.
(XXX)
(page length)-(skip length) < 6
010
(receive digit) ≥ (delete digit) is not established
011
in - Special Attended DID screen.
Restriction Level-Operator ≤ Restriction Level
012
-International is not established in - Operation
(1/3) screen
Day-night combination in the incoming mode is
020
not correct.
Combination of the terminals of operators 1, 2
040
is incorrect.
DN is not installed.
050
Attempting to assign FDN's of UCD # 1 to # 4
051
for the overflow destination of UCD # 5 to # 32
Attempting to assign its own extension number
060
on the key which cannot be assigned to its own
extension number.
<example> DSS (DN)
Attempting to assign its own extension number
070
to the destination of the Escape Hunt Station or
the Call Coverage Path.
Date value is incorrect on the check of month,
100
and leap year in the time and date setting
screen.
"Yes" is selected for both the XDP mode and
101
the Parallel Connect mode.
Probable Cause
SDN
10-K-1
The (XXX) indicates one of the error message
numbers shown below and possible causes of the
errors and countermeasures for them are as
follows.
Countermeasure
Make (page length)-(skip length) ≥ 6.
Make (receive digit) ≥(delete digit).
Make Restriction Level-Operator≤ Restriction
Level-International
Check the day-night combination in incoming
mode.
Check the combination of terminals for
operators 1, 2.
Designate the installed DN.
Set FDN of other UCD, or extension directory
number.
Specify the number except its own extension
number.
Assign the number except its own extension
number.
Check the date setting.
Cancel either of the mode.