Panasonic KX-TD500 System Reference Manual page 395

4.06 Station Name Display
Description
This is a function that shows the user of a PITS
with the display the other extension's directory
number and, if stored, its name. This is
displayed when the user is calling or called by or
talking with an extension party.
[Example]
When calling/called by/talking with an extension
on the DN button :
1234: Tony
Station names do not appear unless they are
assigned in "Extension-Station", Station Name.
Programming
System Programming
"Extension-Station (1/4)",
Station Name
Conditions
When calling an extension on the DN button, if
the called party answers on the SDN button, the
display on the calling station changes as follows:
When calling extension 1234 :
1234: Tony
After extension 1000, whose SDN is owned by
extension 1234, answers the call:
1000: Jack
station name
directory number
Reference
VT Dumb
10-G-1.01 11-C-24.00
4-A-29
The example below shows the display on the
calling station when calling an extension
assigned to Call Forwarding on the DN button :
[Example]
Extension 2000 calls extension 1000.
Extension 1000 sets the destination of Call
Forwarding-No Answer to extension 1001.
The following display appears on the display of
extension 2000 :
→ 1001: Jack
The following display appears on the display of
extension 1001 :
→ 2000: Betty
Operation
None