Panasonic KX-TD500 System Reference Manual page 585

2.02 Speed Dialing-System
Description
Allows any extension user to call outside parties
by dialing the feature number for "Speed Dialing-
System" and a pre-assigned 3-digit code (001 to
200) common to any extension user in the
system.
Up to 200 Speed Dialing Codes can be registered
to the system.
The speed dialing codes are registered in
"System-Speed Dialing-System" screen, and
specific toll restriction level for each speed dialing
code can be assigned in the same screen.
Refer to "Toll Restriction Plan for System Speed
Dialing" on next page for further information.
Programming
System Programming
"System-Tenant", Speed Dialing-
System Boundary
"System-Numbering Plan (2/11)",
Speed Dialing-System
"System-Speed Dialing-System"
Conditions
If Tenant Service is employed, Speed Dialing
Codes can be split by two tenants. In this case,
one tenant cannot use the Speed Dialing Codes
which belong to another tenant.
Each stored number can have up to 32 digits
including CO line access code.
"0~9", "* ", "#", "PAUSE", "FLASH", "—" and
"SECRET" can be registered.
Speed Dialing and manual dialing can be used in
combination. In this case, execute Speed Dialing
before manual dialing.
A feature number for selecting a CO line must be
stored as leading digits.
The feature numbers for selecting a CO line are:
• Local CO Line Access
• Trunk Group 01-48 Access
Reference
VT Dumb
10-D-2.00 11-C-5.00
10-D-6.02 11-C-11.00
10-D-8.00 11-C-13.00
5-A-5
When the mark "* " or "#" is stored in the feature
number for "Speed Dialing-System", the rotary
telephone users cannot use this feature.
Operation
Calling an outside party using System Speed
Dialing Code
1. Lift the handset.
• You hear dial tone 1, 3, or 4.
2. Dial the feature number for
"Speed Dialing-System" (Default
: *1).
• You hear no tone.
3. Dial the appropriate speed
dialing code : 001 to 200.
• The registered number is sent
to CO line automatically.