E Function Commands; Eod; J Item Number - Panasonic KX-TD500 System Reference Manual

E. Function Commands
In Auto type (AT) and Batch type (BT) modes of
Programming mode, the following function com-
mands are used for ending the modes, copying
data and so on.
For details about types of modes, refer to Section
9-D-1.00 "Programming Mode".
1.00 $
E
• In AT mode
After storing data, concludes AT mode.
Enter this command after "INPUT>> " is
displayed.
• In BT mode
Concludes BT mode in the middle of entry.
Be sure to enter this command after comma (,)
or slash (/).
O D
9-E-1
2.00
$
J
In AT mode, this command enables you to read
the desired item immediately.
This function is effective for all the commands
provided with items.
<Example>
Reading Operation command Index 1, Item 17
(FDN for General Operator Call)
If the following is already displayed:
; INDEX=1
; 01 : Tenant Service
; INPUT>>
Enter:
$J17 ( )
Displays:
; 17 : FDN for General Operator Call
; INPUT>>
Every pressing of the RETURN key displays the
next item. After the last item is displayed, the first
item is displayed by pressing the RETURN key.
Item Number
Y