Panasonic KX-TD500 System Reference Manual page 1217

51.00 Night Answer Group (NAG)
Description
The Night Answer Group can be created to receive calls at night.
Calls from more than one CO line may arrive at this group.
The size limit of the group is 32 extensions.
Refer to Section 3-B-8.01
"Directed Night Answer" and Section
3-B-8.04 "Fixed Night Service" for
further information.
Input Format
Mode
N A G
Index Number
None
Item Number Input Values
Item
Assigning Items
Number
01
Destination
(Night Answer Group
to
Extensions)
32
Conditions
Extensions which have different tenant number can belong to the same Night Answer Group. In this case,
destinations for an incoming CO call are determined by the tenant number of the CO line.
Programming
(Example)
To assign the Night Answer Group Extensions
1. At the programming prompt (PRG>), type:
; PRG> NAG AT
The screen displays the Input prompt (INPUT >>) as follows:
; PRG> NAG AT
; 01: Night Answer EXT .........0
; INPUT >>
2. At Input prompt (INPUT >>), type:
; PRG> NAG AT
; 01: Night Answer EXT .........0
; INPUT >> DN109
Item Number CR
DN XXXX (XXXX : three or four digits):
0 : none
(Available only when Trunk Group "Incoming Mode
(Night)" is set to "FIXED")
(Default = 0)
( ↵ )
( ↵ )
11-C-91
CO1 CO2
Night Answer Group
Input Value
extension number
: clearing function is effective
for the item
CO3
CLR