Panasonic KX-TD500 System Reference Manual page 1154

13.00 Speed Dialing-System (SPD)
Description
To assign toll restriction levels and telephone
numbers and names for speed dialing codes.
(Password level: Three or higher)
Input Format
Mode
S P D
Index Number
Index Number
001 to 200
Item Number Input Values
Item
Assigning Items
Number
1
Restriction Level
2
Dial
3
Name
Conditions
If "Operation (OPR)", Tenant Service is set to "Y (Yes)", 200 speed dialing codes
can be split between tenant 1 and tenant 2. To split them, "Tenant (TNN)", Speed
Dialing-System Boundary must be executed.
For further description of assigning items, refer to Section 10-D-8.00 "Speed
Dialing - System".
(
Item Number
Index Number
00 : a call is checked against the system toll
restriction feature
00 to 16 : a call is first checked against the toll
restriction level of Extension Users
Maximum 32 numeric characters,
below :
P : pause
F : flash
[ : start of secret number
] : end of secret number
- : hyphen
(Enter [ ] in a pair.)
Maximum 16 ASCII characters except for characters '\'
and '˜'
(Be sure to enter " before and after the codes. The first
character must be 'A' to 'Z' or 'a' to 'z'.)
11-C-28
)
CR
Explanation
Speed dialing code
Input Value
, # and marks
: clearing function is effective
for the item
CLR