Panasonic KX-TD500 System Reference Manual page 1232

Item
Assigning Item
Number
19 Channel No. 16
20 Channel No. 17
21 Channel No. 18
22 Channel No. 19
23 Channel No. 20
24 Channel No. 21
25 Channel No. 22
26 Channel No. 23
27 Channel No. 24
28 Channel No. 25
29 Channel No. 26
30 Channel No. 27
31 Channel No. 28
32 Channel No. 29
33 Channel No. 30
34 Channel No. 31
35 Channel No. 32
Conditions
This command is available only for the system is installed T-1 or E-1 card.
– It is not available to assign for item No. 01.
– Frame Sequence "D4" and "ESF" are available for T-1 card only, "PCM30" and "PCM30-CRC" are
available for E-1 card only.
– Line Cording "B8ZS" is available for T-1 card only, "HDB3" is available for E-1 card only.
– Channel type "LCO", "GCO", "DID", "OPX" and "TIE" are available for T-1 card only and "DR2",
"E&M-C" and "E&M-P" are available for E-1 card only.
– The "Option" item shows a status of installation T-1 DTMF or E-1 DSP card on the T-1/E-1 card.
When the command is executed for T-1 card, this value must be "5". When the command is
executed for E-1 card, this value must be "9".
Input Value
T-1 card (KX-T96187)
0: none
1: LCO
2: GCO
3: DID
4: OPX
5: TIE
[Note]
" " will be displayed
in the following items and
cannot be assigned:
• Item numbers 28
through 35
11-C-106
continued
E-1 card (KX-T98188)
0: none
6: DR2
7: E&M-C
8: E&M-P
[Note]
" " will be displayed
in the following items and
cannot be assigned:
• Item numbers 19 and 35