Panasonic KX-TD500 System Reference Manual page 494

1.02 Screened Call Transfer to Station
Description
Allows an extension user to transfer a call placed
on the DN or CO button to another extension with
announcement.
Programming
None
Conditions
The extension users cannot transfer the following
calls.
• A call with Attendant Console
• A call with Doorphone
• Paging Announcement through built-in
speaker of PITS
• A call which is made by ICM button
If Music on Hold is available, from the start of the
transferring operation until the destination party
answers, the system sends Music on Hold to the
transferred party.
For further detail, refer to Section 3-E-1.00
"Music on Hold".
Operation
During a conversation with an extension or an
outside party on the DN or CO button
1. Press the TRANSFER button.
• The other party is placed on
• You hear confirmation tone 2
• If your PITS has a display, it
2. Dial the directory number of the
destination: three or four digits.
• You hear ringback tone.
3. After the destination answers,
make the announcement.
4. Replace the handset or press the
SP-PHONE button.
• The transferred party and the
(Supplement)
After step 2, you can interrupt the transfer and
talk to the held party, (1) if the destination has
already answered, by pressing the FLASH
button, and then the TRANSFER button. (2) if
the destination has not answered yet, by
pressing the TRANSFER button only.
After step 2, you can change the destination by
pressing the FLASH button while hearing
ringback tone, busy tone, or DND tone. Then
after hearing dial tone, dial the directory number
of the new destination.
4-F-2
Consultation Hold.
and then dial tone 1, 3, or 4.
shows:
Transfer to
destination party start
conversation.