Panasonic KX-TD500 System Reference Manual page 658

1.02 Flexible Night Service
Description
Flexible Night Service allows the Operator 1
(Attendant Console or extension user) to change
the assigned night answer destination on a CO
line basis by dialing the feature number for
"Flexible Night Service".
To utilize this feature, set "Group-Trunk Group"
Incoming Mode (Night) to FLEXIBLE. All CO
lines belong to this trunk group are covered by
this assignment.
If FIXED is selected for above setting, the
assigned night answer destination cannot be
changed by the Operator 1.
Call handling in Flexible and Fixed night service
is almost the same.
The difference is:
Flexible The Operator 1 (Attendant Console
or Extension) can change the night
answer destination.
Fixed A group of extensions (Night
Answer Group) can be assigned as
the destination of one or more CO
lines in night mode
Programming
System Programming
"Group-Trunk Group (1/3)",
Incoming Mode (Night)
"Trunk-CO Line",
Night Answer Point
"System-Numbering Plan (8/11)",
Flexible Night Service
Conditions
If tenant service is employed, the night answer
destination can only be changed for a CO line in
the same tenant by the Operator 1.
Reference
VT Dumb
10-E-1.01 11-C-15.00
10-F-1.00 11-C-20.00
10-D-6.08 11-C-11.00
5-G-2
Operation
Changing a night answer destination to an
extension
1. Lift the handset.
2. Dial the feature number for
"Flexible Night Service" (Default :
65) and CO physical number and
destination extension number.
• You hear confirmation tone 1 or
2.
3. Replace the handset.
Changing a night answer destination to the remote
maintenance port
1. Lift the handset.
2. Dial the feature number for
"Flexible Night Service" (Default :
65) and CO physical number and
FDN for remote.
• You hear confirmation tone 1 or
2.
3. Replace the handset.