Panasonic KX-TD500 System Reference Manual page 621

1.02 Screened Call Transfer to Station
Description
Allows an extension user to transfer the calls
(both extension and CO) to another extension
with announcement.
Programming
System Programming
"System-Numbering Plan (11/11)",
Transfer
"World Select 3(WS3)",
SLT Transfer Operation
Conditions
The extension user cannot transfer the following
calls.
• A call with Attendant Console
• A call with Doorphone
• An extension call made by an ICM button.
If Music on Hold is assigned, Music on Hold is
sent to the transferred party since the party starts
being transferred until he starts conversation with
the destination party.
For further detail, refer to Section 3-E-1.00
"Music on Hold".
The user can execute this function even after
holding another party.
Operation -1 (Mode 1 or 3)
While having a conversation;
1. Press the switchhook for
approximately one half second
and release it.
• The other party is placed on
Consultation Hold.
• You hear confirmation tone 2
and then dial tone 1, 3, or 4.
2. Dial the directory number of the
destination: three or four digits.
• You hear ringback tone.
3. Wait for the answer and
announce.
Reference
VT Dumb
10-D-6.11 11-C-11.00
11-C-45.00
5-D-3
4. Replace the handset.
• The call is transferred to the
destination.
(Supplement)
If you want to return to the held party, press the
swithhook for approximately one half second and
release before the destination extention answers.
Operation -2 (Mode 2)
While having a conversation;
1. Press the switchhook for
approximately one half second
and release it.
• The other party is placed on
Consultation Hold.
• You hear confirmation tone 2
and then dial tone 1, 3, or 4.
2. Dial the feature number for
"Transfer" (Default : 691).
• You hear confirmation tone 2
and then dial tone.
3. Dial the directory number of the
destination: there or four digits.
• You hear ringback tone.
4. Wait mfor the answer and
announce.
5. Replace the handset.
• The call is transferred to the
destination.
(Supplement)
• If you want to return to the held party, press
the swithhook for approximately one half
second and release before the destination
extension answers.
• If the feature number for "Transfer" is not
dialed at step 2, the call will be disconnected
after replacing the handset.